Application of 3D technologies in modeling the design of clothes with elements of national décor
https://doi.org/10.48184/2304-568X-2021-3-60-67
Abstract
This article presents the results of modeling and designing modern clothing with national decorative elements using the program of three-dimensional modeling of Marvelous Designer, AutoCAD and CLO 3D. The functions and potential of the Marvel designer (MD) CLO 3D automated systems are also considered. It is concluded that these automated systems are most suitable for modeling clothes with decor.
About the Authors
Sh. G. Djurayeva
«Tashkent Institute of Textile and Light Industry»
Uzbekistan
Uzbekistan
100100, Tashkent, Shokhjakhon st., 5
S. Sh. Tashpulatov
«Tashkent Institute of Textile and Light Industry»
Uzbekistan
Uzbekistan
100100, Tashkent, Shokhjakhon st., 5
I. V. Cherunova
«Don State Technical University»
Russian Federation
Russian Federation
346500, Rostov region, Shakhty, st. Shevchenko, 147
References
1. Norenkov I.P. Osnovy avtomatiziro-vannogo proektirovanija: Ucheb. dlja vuzov. 2-e. - M.: Izd-vo MGTU im. N.Je. Baumana, 2002. 336 s. (in Russian)
2. Saidi D.R., Domulodzhonova N.A. modelirovanie konstruktsii odezhdy po tekhnologii 3D. Universum: tekhnicheskie nauki. 2019. № 1 (58). S. 30-34
3. Saidova SH.A. Razrabotka metoda proek-tirovaniya ehrgonomichnoi odezhdy s ispol'zo-vaniem trekhmernogo skanirovaniya: avtoref. dis. kand. tekh. nauk: 27.10.2017 / SH.A. Saidova – M.: 2017.-19s
4. Modelirovanie konstruktsii odezhdy po tekhnologii 3D Rezhim dostupa: https://kompkroy.ru/neveroyatnye-vozmozhnosti-clo-3d.html. Data obrashcheniya : 05.07.2021
5. Sanginova D.A. Proektirovanie sovre-mennoi natsional'noi odezhdy na osnove bes-kontaktnykh metodov izmereniya zhenskikh figur [Tekst]: dis. kand. tekh. nauk: 05.19.04 / D.A. Sanginova – M.: 2011.–189 s.
Review
For citations:
Djurayeva Sh.G., Tashpulatov S.Sh., Cherunova I.V. Application of 3D technologies in modeling the design of clothes with elements of national décor. The Journal of Almaty Technological University. 2021;(3):60-67. (In Russ.) https://doi.org/10.48184/2304-568X-2021-3-60-67
Views:
713
Email this article 