Comparison of various methods of flines of flax raw materials used in Kazakhstan

Significant attention in the article is devoted to the study of different technology of the lobe and the physical and mechanical properties of oil flax fiber and primary processing in relation to Kazakhstan.  When studying the technology of oil flax fiber soaking, the task was set of separate the fiber from the stems, removal of lignin and pectin-forming substances. The questions of various technologies of the flax stalks are considered. The most optimal technology for producing textile fiber was determined for the conditions of Kazakhstan. Comparative studies of linear density and length of fibers have been carried out. According to the results obtained, the linear density of the fiber in an aqueous medium is 6.7 T, the result of the treated fiber is 3.1 T. That is, the technology used is to remove lignin and pectin from the fiber.

1. Biologicheskaya mochka l'na. Rezhim dostupa: https://www.booksite.ru/funtext/mir/onov/bio/log/ich/esk/aya/1.htm (data obrashcheniya 15.12.2019) (in Russian)

2. Mironov K. M. Biologicheskaya mochka l'n. Rezhim dostupa: https://www.booksite.ru/funtext/mir/onov/bio/log/ich/esk/aya/2.htm (data obrashcheniya 15.12.2019) (in Russian)

3. Taraimovich I.V. Osobennosti tekhnologii uborki l'na maslichnogo v usloviyakh Zapadnogo Poles'ya Ukrainy // Sovremennaya tekhnika i tekhnologii. 2013. Rezhim dostupa: http://technology.snauka.ru/2013/06/2107 (data obrashcheniya 10.04.2020) (in Russian)