The development of technology and research of quality indicators of nachos from non-traditional raw materials

Currently, due to lifestyle changes, ready-made snacks are a popular and in-demand food product. The use of a large number of snacks leads to the development of a number of negative changes in human health. According to WHO, diseases of the gastrointestinal tract are among the five most common diseases in the world. Most often these diseases affect children, preschool, school age and students. The reason for this may be, first of all, the uncontrolled use of «dry rations», that is, various types of snacks. But snacks can serve as a technological basis for designing innovative food products with excellent consumer characteristics (organoleptic and physico-chemical properties). Therefore, replacing the harmful component of snacks with balanced raw materials, a useful product is obtained. The article describes the technology of nachos obtained by changing the component of the recipe, and with the addition of unconventional raw materials. When preparing nachos, cottage cheese was used to increase its nutritional value. To check the quality indicators of raw materials and finished products, standard visual-sensory and laboratory research methods were used, the results of the studies were described in detail and recorded. To date, the most common fast food product as an alternative to chips has been offered Mexican nachos. Non-traditional raw materials and natural additives were included in the nachos recipe. As an unconventional raw material, cottage cheese was chosen as the main component according to the recipe. Cottage cheese, fat content 4.1%, was obtained from natural cow's milk by fermentation by thermophilic bacteria. The article presents a balanced nachos recipe. According to the calculated recipe, the nachos product was prepared. The organoleptic and qualitative indicators of raw materials and finished products are determined. According to the results of the studies, the lead content in nachos was 0.019 mg/kg, cadmium-0.003 mg/kg, manganese-0.051 mg/kg and iron-0.038 mg/kg. The results obtained comply with the requirements of regulatory documentation. At the same time, the protein content in the finished product was 9.6 g, fat 5 g, carbohydrates 40.9 g, total energy value-249.67 kcal. The results of the study actually showed that there are grounds to recommend nachos on the market as alternates for fast food products.

1. Şetilina İ.P., Oseneva O.V. Rynok fast-fuda: razvitie i prognozy [Fast food market: development and forecasts] / İ.P. Şetilina, O.V. Oseneva // Ekonomika i biznes. - 2020. - №2. - S. 114-125

2. Kazieva M.A., «Fast-fud» kak aktuälnaia problema pitania ["Fast food" as an actual problem of nutrition] / M.A.Kazieva // Ekonomika i biznes. - 2017. - № 4. - S. 33-37.

3. Tipsina N.N. İspölzovanie netradisionnogo syrä v pişevyh proizvodstvah [The use of non-traditional raw materials in food production] / N.N. Tipsina // Ekonomika i biznes. - 2015. - № 5. - S. 120-125.

4. Biksan E.V. Vlianie kachestva moloka na organolepticheskie i fiziko-himicheskie pokazateli tvoroga [The influence of milk quality on the organoleptic and physico-chemical parameters of cottage cheese] / E.V. Biksan // Vestnik VGUİT. - 2016. - № 1. - S. 186.

5. Soi A.V. Sposob prigotovlenia chipsov [The method of cooking chips]/ A.V. Soi // İzvestia vuzov. Pişevaia tehnologia. - 2016. - № 6. - S. 7.

6. Lasko A.V., Sevodina N.A. Resursosberegaiuşie ekologicheski bezopasnye tehnologii hranenia i pererabotki selskohozäistvennoi produksii [Resourcesaving environmentally safe technologies for storage and processing of agricultural products]/ A.V.Lasko, N.A. Sevodina // Mehanika i tehnologia. - 2018. - № 2. - S. 28.

7. Kalinina İ.V., Rüskina A.A Sovremennye podhody v tehnologii bezopasnoi snekovoi produksii [Modern approaches in the technology of safe snack products] / İ.V.Kalinina, A.A. Rüskina // Vestnik İUUrGU. - 2014. - № 3. - S. 29-36.

8. Skurihina İ.M., Volgareva. M.N. Himicheski sostav pişevyh produktov [Chemical composition of food products] / İ.M.Skurihina, M.N. Volgareva // Agropromizdat, - 2010. - № 2. - S. 110-111.

9. Rodina T.G. Sensornyi analiz prodovölstvennyh tovarov [Sensory analysis of food products] / T.G. Rodina // İzdatelski sentr «Akademia». - 2009. - № 3. - S. 22-24.

10. Şuvarikov A.S. Fiziko-himicheskie pokazateli kozego, ovechego i korovego moloka [Physicochemical parameters of goat's, sheep's and cow's milk] / A.S. Şuvarikov // Ovsy, kozy, şerstänoe delo. - 2017. - № 2. - S. 38-45.

11. Pikue P.A., Gou P., Pruneri V., Dias İ., Kastellari M. Vnedrenie podhoda "kachestvo za schet dizaina" v proses objarivania kartofelnyh chipsov [Introduction of the "quality at the expense of design" approach to the process of frying potato chips] / P.A. Pikue, P. Gou, V. Pruneri, İ. Dias, M. Kastellari // Jurnal pişevoi injenerii. - 2009. - 260. - S. 22-29.

12. Guggisberg D., Lousli S., Bleizer K., Badertşer R., Şmidt R. Vlianie holodnogo hranenia syrnogo moloka na koaguläsionnye svoistva moloka, soderjanie kälsia i vyhod syra [The effect of cold storage of raw milk on the coagulation properties of milk, calcium content and cheese yield] / D. Guggisberg, S. Lousli, K. Bleizer, R. Badertşer, R. Şmidt R // Mejdunarodnyi molochnyi jurnal. - 2011. - 134. - S. 54-65.

13. Hozäev İ.A. Proektirovanie tehnologicheskogo oborudovania pişevyh proizvodstv: Uchebnoe posobie [Design of technological equipment for food production] / İ.A. Hozäev // İzdatelstvo «Län». - 2011. - 272 s.

14. Bredihin S.A. Tehnologicheskoe oborudovanie pererabotki moloka: Uchebnoe posobie [Technological equipment for milk processing]/ S.A.Bredihin // İzdatelstvo «Län». - 2019. – 417 s.

15. Zabirov İ.M. Metody i sredstva montaja tehnologicheskogo oborudovania [Methods and means of installation of technological equipment]/ İ.M. Zabirov, G.S. İunusov // İoşkar-Ola. / 2001. – 96 s.