Preview

The Journal of Almaty Technological University

Advanced search

Innovative approaches to the formation of standard female figures in Kazakhstan to improve the quality of garment products

https://doi.org/10.48184/2304-568X-2025-4-207-216

Abstract

An analysis of the literature sources has shown the need for the development of information support for CAD systems, based on data from anthropometric studies of the body shapes of Kazakhstani consumers of modern clothing. (Anthropometric characteristics, improvement of size typology, and clothing design methods that take into account the most common body shapes and their individual features in Kazakhstan) with the aim of producing products demanded in the consumer market.Based on measurements of female body shapes in Kazakhstan, mathematical models have been identified that allow the development of classification and determination of the values of leading size characteristics.An analysis of modern size standardization of garments in the global space revealed various data on clothing labeling in different countries, leading to the current issue of harmonization in the field of standardization, i.e., aligning the actions of international, national, and regional quality systems to improve product quality and its competitiveness on a global scale. When developing international standards for products in Kazakhstan, primary attention should be given to establishing unified testing methods as well as requirements for terminology, storage, and transportation, without which mutual understanding between the manufacturer and the consumer is impossible.For the first time, studies aimed at the need to use anthropometric measurements when determining clothing sizes appeared in the early 1930s.Currently, the solution to this problem is focused on the formation of a database for the processes of automated clothing design.

About the Authors

G. S. Toxabayeva
Almaty College of Service and Technology
Kazakhstan

050046, Almaty, Satpaev Street 86



R. O. Zhilisbayeva
«Аlmaty Technological University» JSC
Kazakhstan

050012, Almaty, Tole bi str., 100



S. K. Kiyabaeva
«Аlmaty Technological University» JSC
Kazakhstan

050012, Almaty, Tole bi str., 100



References

1. Kiyabaeva, S.K. (2013). Perspektivy i problemy antropometricheskikh izmerenii naseleniya Respubliki Kazakhstan [Prospects and Problems of Anthropometric Measurements of the Population of the Republic of Kazakhstan]. In Sovremennye tendentsii tekhnicheskikh nauk: materialy II Mezhdunarodnoi nauchnoi konferentsii (Ufa, May 2013), Vol. 0, pp. 68–69. Ufa: Leto. URL: https://moluch.ru/conf/tech/archive/74/3850. (in Russian).

2. Baskimbaeva, T.A. (1997). Sovershenstvovanie razmernoi tipologii zhenskogo naseleniya Respubliki Kazakhstan [Improvement of Dimensional Typology of the Female Population of the Republic of Kazakhstan]. Taur, 1. (in Russian).

3. GOST 31396-2009. Klassifikatsiya tipovykh figur zhenshchin po rostam, razmeram i polnotnym gruppam dlya proektirovaniya odezhdy [Classification of Typical Female Figures by Height, Size, and Fullness Groups for Clothing Design]. (in Russian).

4. GOST 31397-2009. Klassifikatsiya tipovykh figur zhenshchin osobo bol’shikh razmerov [Classification of Typical Female Figures of Extra-Large Sizes]. Moscow: Standartinform, 2009. (in Russian).

5. GOST 31398-2009. Klassifikatsiya tipovykh figur beremennykh zhenshchin [Classification of Typical Figures of Pregnant Women]. Moscow: Standartinform, 2009. (in Russian).

6. Yi, K.-H., Istook, C., Kang, Y., & Choi, H.-S. (2007). Comparative Analysis of Korean and American Body Sizes & Shapes Using 3D Scanned Anthropometric Data. Journal of the Korean Society of Clothing and Textiles, 31(6), 892–901.

7. Yi, K.-H. (2010). Korean Obese Women (Part 1). Journal of the Korean Society of Clothing and Textiles, 34(6), 937–954.

8. Yi, K.-H. (2011). Nationwide Anthropometric Survey and Its Applications. Textile Technology Seminar 2011, Kazakhstan–Korea Textile Technology Cooperation Project, Almaty Technological University, October 27, pp. 91–108.

9. Rogov, P.I., & Konopal’tseva, N.M. (2004). Konstruirovanie zhenskoi odezhdy dlya individual’nogo potrebitelya [Design of Women’s Clothing for Individual Consumers]. Moscow: Akademiya. 398 p. (in Russian).

10. OST 17-325-86. Izdeliya shveinye, trikotazhnye, mekhovye. Tipovye figury muzhchin. Razmernye priznaki dlya proektirovaniya odezhdy [Sewing, Knitwear, and Fur Products. Typical Male Figures. Dimensional Indicators for Clothing Design]. Moscow, 1986. (in Russian).

11. OST 17-326-81. Izdeliya shveinye, trikotazhnye, mekhovye. Tipovye figury zhenshchin. Razmernye priznaki dlya proektirovaniya odezhdy [Sewing, Knitwear, and Fur Products. Typical Female Figures. Dimensional Indicators for Clothing Design]. Moscow, 1981. (in Russian).

12. OST 17-66-77. Izdeliya shveinye, trikotazhnye, mekhovye. Figury devochek tipovye. Razmernye priznaki dlya proektirovaniya odezhdy [Sewing, Knitwear, and Fur Products. Typical Figures of Girls. Dimensional Indicators for Clothing Design]. (in Russian).

13. OST 17-67-77. Izdeliya shveinye, trikotazhnye, mekhovye. Figury mal’chikov tipovye. Razmernye priznaki dlya proektirovaniya odezhdy [Sewing, Knitwear, and Fur Products. Typical Figures of Boys. Dimensional Indicators for Clothing Design]. (in Russian).

14. Lopandina, S.K. (2002). O neobkhodimosti sovershenstvovaniya sushchestvuyushchei razmernoi tipologii [On the Need to Improve the Existing Dimensional Typology]. Shveinaya promyshlennost’, 6, 40–41. (in Russian).

15. Wikipedia. Mezhdunarodnaya standar-tizatsiya [International Standardization]. URL: https://ru.wikipedia.org/wiki/ (in Russian).

16. EN 13402-1 (2001). Size Designation of Clothes – Part 1: Terms, Definitions and Measuring Methods (ISO 3635:1981, modification).

17. EN 13402-2 (2002). Size Designation of Clothes – Part 2: Primary and Secondary Dimensions.

18. EN 13402-3 (2004). Size Designation of Clothes – Part 3: Measurements and Intervals.

19. EN 13402-4 (Draft). Coding System.

20. Bureau of National Statistics, Agency for Strategic Planning and Reforms of the Republic of Kazakhstan. (2025). Demograficheskaya statistika. Chislennost’ naseleniya Respubliki Kazakhstan po polu i tipu mestnosti (na 1 iyulya 2025 g.) [Demographic Statistics. Population of the Republic of Kazakhstan by Gender and Type of Locality (as of July 1, 2025)]. Published August 14, 2025. (in Russian).

21. Voronin, M.A. (1985). Konstruirovanie i izgotovlenie muzhskoi verkhnei odezhdy besprimerochnym sposobom [Design and Manufacture of Men’s Outerwear Without Fitting]. Kyiv: Tekhnika. 232 p. (in Russian).

22. Nazarov, A.S. (2006). Fotogrammetriya: uchebnoe posobie dlya studentov vuzov [Photogrammetry: Textbook for University Students]. Minsk: TetraSystems. 368 p. (in Russian).

23. Ledeneva, I.N., Rybakova, O.N., Razin, I.B., & Chalenko, E.A. (2010). Analiz metodov opredeleniya antropometricheskikh kharakteristik vneshnei formy figury cheloveka [Analysis of Methods for Determining Anthropometric Characteristics of the Human Body Shape]. MGUDiT, Moscow, 22 p. (in Russian).

24. Petrosova, I.A., & Koblyakova, E.B. (2003). Ustroistvo dlya beskontaktnogo snyatiya proektsi-onnykh razmerov ob’ekta [Device for Non-Contact Measurement of Object’s Projection Sizes]. Patent Application RF 2001119821, A41H1/02, published 27.06.2003. (in Russian).

25. Lekala. HTML-versiya faila [HTML Version of the File]. http://lekala.info/leko/dn/scn3d.doc. (in Russian).

26. Image Twin Body Scanning System. Textile/Clothing Technology Corporation (TC2). www.tc2.com.

27. Cyberwear (“Elektronnaya odezhda”) [Electronic Clothing]. www.cyberware.com.

28. Symcad (Model Turbo Flash/3D). www.symcad.com


Review

For citations:


Toxabayeva G.S., Zhilisbayeva R.O., Kiyabaeva S.K. Innovative approaches to the formation of standard female figures in Kazakhstan to improve the quality of garment products. The Journal of Almaty Technological University. 2025;150(4):207-216. (In Russ.) https://doi.org/10.48184/2304-568X-2025-4-207-216

Views: 18


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2304-568X (Print)
ISSN 2710-0839 (Online)