Preview

The Journal of Almaty Technological University

Advanced search

The role of the use of mineral fibers in the process of obtaining composite materials for special purpose

https://doi.org/10.48184/2304-568X-2023-4-61-69

Abstract

   The article discusses the composition, structure and properties of mineral fillers and their role in the production of composite materials. Depending on the purpose of composite polymer materials, in order to save expensive raw materials, taking into account the operating environment and decorative requirements, it is possible to widely vary the percentage of raw materials and obtain products with different physical and mechanical properties, color and other performance properties.

   The purpose of the research work is to study the possibility of using mineral fibers in the process of obtaining composite materials for special purposes.

   The production of composites makes it possible to significantly expand the range of polymeric materials and the variety of their properties already based on polymers created and produced by the industry. Physical and chemical modification of existing polymers, their combination with substances of a different nature, different structure is one of the promising ways to create materials with a new required set of properties. The use of various mixtures of polymers, additives, fillers and methods of their processing, their introduction into the polymer, both in the process of synthesis and during processing, makes it possible to obtain polymer composite materials of various structures, with the required set of performance properties. An analysis of the use of mineral fillers shows that they are distinguished by a variety of chemical composition, have different physical and mechanical properties, including density, specific surface area, particle shape, etc. The conducted studies have
confirmed the possibility of using basalt fiber and products based on it as a component that is heat-resistant and resistant to aggressive and humid environments.

About the Authors

I. A. Rysbaeva
Kyrgyz State Technical University named after I.Razzakov
Kyrgyzstan

720044

Ch. Aitmatov avenue 66

Bishkek



A. R. Upenova
Kyrgyz State Technical University named after I.Razzakov
Kyrgyzstan

720044

Ch. Aitmatov avenue 66

Bishkek



References

1. Imankulova A.S., Tekstilnyie kompozity [Textile composites], Bishkek: Izdatelskii center «МОК» [Publishing center «MOK»], 2005. (In Russian)

2. Ivanokckii S.K., Bahaeva A.N., Zheryakova K.V., Ishkuvatova A.R., K voprosu pererabotki polimernyh kompozisionnyh materialov [On the issue of processing polymer composite materials], Uspehi sovremennogo estestvoznaniya [Advances in modern natural science], 2014. – № 12-5. – page 592-595; (In Russian)

3. Rysbaeva I.A., Poluchenie bazaltovogo kompozisionnogo materiala s ispolzovaniem kompleksnogo svyazuishego [Preparation of basalt composite material using a complex binder], Izvestiya vuzov [News of universities], 2008. - № 5 - 6. - page 32-34. (In Russian)

4. Ershova O.V., Ivanovskii S.K., Chuprova L.V., Bahaeva A.N., Sovremennye kompozisionnye materialy na osnove polimernoi matrisy [Modern composite materials based on a polymer matrix], Mezhdunarodnyi zhurnal prikladnyh I fundamentalnyh issledovanii [International Journal of Applied and Fundamental Research], 2015. – № 4 (part 1) – С. 14-18 (In Russian)

5. Nurpeisov S.K., Karabaev N.T., Bayalieva G.M., Zhuzbaev N.N., Vysokopochnye modifitsirovannyye kompozitsii dlya gidrotekhnicheskikh sooruzheniy [High-strength modified compositions for hydraulic structures], Mekhanika i Tekhnologii [Mechanics and Technology], 2013. – № 1 (part 39) – С. 91-96 (In Russian)

6. Mineralpro: [Electronic resource], https://mineralpro.ru/minerals/talc (date of review november 2023)

7. Geosro: [Electronic resource], https://geosro.ru/mineral-barit-istoriya-poleznye-svojstva-i-opisanie (date of review november 2023) (In Russian)

8. Nasionalnaya electronnaya biblioteka [National Electronic Library]: [Electronic resource], https://viewer.rsl.ru/ru/rsl01003541168 (date of review november 2023)

9. Ormonbekov T.O., Model' tekstil'nogo kompozitsionnogo materiala [Model of textile composite material], Izvestiya vuzov [News of universities], 2005. -№ 3. - page 63 - 65. (In Russian)

10. Tsai, S.W. Structural Behavior of Composite Materials, NASA CR-71, 1964 – р. 160.

11. The Textile Institute, Textile Term and Definitions, 7<sup>th</sup> ed., The Textile Institute Manchester, 1978. – р. 234.

12. Cusik, G.E. (eds) Proc. Symp. Tomorrow"s Yams, UMIST / G.E. Cusik, C.A. Lawrence. – Manchester, 1984. – 213 с.

13. Owen, M.I. Biaxial strenght behaviour of glass – fabric – reinforced polyester resins / M.I. Owen, D.I. Rice. Composites, 1984. - Р. 13 - 25.

14. Hongu, T. New millennium fibres / T. Hongu, G.O. Phillips. – Cambridge: Woodhead Publising Limited, 2003. – 384 p.

15. Tot I.D. Volokonnyye kompozitsionnyye materialy [Fiber composite materials], Metallurgiya [Metallurgy], 1978. – 139 page. (In Russian)


Review

For citations:


Rysbaeva I.A., Upenova A.R. The role of the use of mineral fibers in the process of obtaining composite materials for special purpose. The Journal of Almaty Technological University. 2023;(4):61-69. (In Russ.) https://doi.org/10.48184/2304-568X-2023-4-61-69

Views: 284


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2304-568X (Print)
ISSN 2710-0839 (Online)